Search

The AINDT offers website registered members the facility of a Business directory advertising

this is the Australian Directory for Non Destructive testing

Location:

 

Technical Experts Directory

  

LMATS Pty Ltd Sydney office

Contact Person: Alireza Hedayati
Address: 1C / 137 Silverwater Road, Silverwater NSW 2128
Phone: 02 9648 1989, 0478 353 720
  • LMATS Pty Ltd ( Laboratory Materials Analysis Testing Services) is a solely Australian owned and operated company
  • Our team of qualified Technicians, Engineers and Metallurgists are available for certification and inspection either in our workshop facility or on site locations including offshore facilities
  • LMATS Pty Ltd Quality Management System is certified to ISO / IEC 17025 and our Mechanical Testing Laboratory and services are accredited by NATA (National Association of Testing Authorities)
  •  LMATS is also a company member of AINDT (Australian Institute for Non Destructive Testing) and all our technicians have been certified by AINDT for the provision of Non-Destructive testing
  • LMATS have an extensive range of Inspection and testing services including: 
  • NON-DESTRUCTIVE TESTING: 
  • Visual Inspection (VT) 
  • Radiographic examination (RT) 
  • Ultrasonic examination – Flaw detection (UT)
  • Thickness testing (UTT) 
  • Eddy current testing – Coating thickness test
  • Conductivity test
  • Flaw detection
  • Crane inspection 
  • Magnetic Particle Testing - Fluorescent and Colour contrast (MPI) 
  • Dye Penetrant Testing - Fluorescent and Colour contrast (DPE / DPI / PT) 
  • Hydrostatic testing including pipes, vessels and valves Ferrite measurement by Fisher Ferritoscope 
  • Hardness testing – Portable Leeb / Equotip, Brinell, Rockwell, Vickers, Poldi 
  • Positive material identification (PMI) – XRF / AES - Spark spectro 
  • Contamination test - Iron or Iron oxides on Passivated stainless steel components 
  • Concrete slab thickness test
  • Cover thickness test
  • Concrete hardness & strength test 
  • Reinforcing material detection and evaluation in concrete slab Anchors proof load test on buildings
  • ENGINEERING INSPECTIONS: Pressure Equipment Inspection and Certification
  • Mandatory Inspection by Worksafe Victoria
  • Read Page no. 10 for the facts published by Worksafe Victoria
  • Pressure vessel
  • Pressure piping
  • Air receivers
  • Boilers
  • Deaerators
  • Tanks
  • Road Tankers
  • Process vessels
  • Transportable vessels
  • Heat exchangers
  • coolers
  • Condensers
  • Plant and structural inspection
  • Condition assessment. MDR & Conformity assessment for Pressure vessels 
  • CHEMICAL ANALYSIS: 
  • Chemical composition (O.E.S.) and Material Identification Material identification – XRF Spectrometer-Chemical analysis 
  • ENGINEERING & MECHANICAL TESTING: 
  • Proof Load and Tensile test
  • Bond tensile test Shear test
  • Torsion test
  • Flexural test Bend test
  • Weld fillet and Nick break test Charpy impact test Rockwell hardness test
  • Superficial Rockwell Hardness test
  • Portable Rockwell hardness test 
  • Brinell hardness test 
  • Portable Brinell hardness test 
  • Vickers Hardness test
  • Vickers –Micro Hardness test
  • Portable Leeb / Equotip hardness test
  • Poldi Hardness test 
  • Embrittlement test 
  • Testing of fasteners, springs and wires
  • METALLURGICAL TESTING: 
  • Macroscopic Examination 
  • Microstructural examination 
  • Grain size measurement Inclusion contents test 
  • Micro constituents counting - Ferrite & intermetallics count 
  • Graphite classification test 
  • Etch structure classification for corrosion resistance 
  • Microscopic thickness measurement 
  • Case depth determination 
  • Coatings – thickness test by strip & dissolve/weigh method
  • CORROSION RESISTANCE TESTING: 
  • Pitting & crevice corrosion resistance test – ASTM G48 
  • Intergranular corrosion resistance test – ASTM A262 & AS 2038 
  • Neutral Salt spray test Dezincification test
  • WELD CERTIFICATION: 
  • Welding Procedure Specification 
  • Welding Procedure Qualification 
  • Witnessing Weld Certification – Visual & NDT
  • All mechanical / metallurgical / chemical and corrosion tests
  • CONCRETE TESTING: 
  • Physical Properties test - Density
  • Dimensional changes
  • Compression strength, etc 
  • Concrete slab thickness test
  • Concrete cover on reinforcing material 
  • Reinforcing material detection and evaluation in concrete slab 
  • Concrete hardness / Strength test 
  • On-site anchors proof load test on buildings
  • HAND TOOLS TESTING: 
  • Performance and quality test – Hammers, screw drivers, Chisels, pliers, pincers, nippers 
  • ABRASIVES TESTING: 
  • Reinforced cut-off / grinding disc: 
  • Safety - Spinning and Performance - Abradability Index 
  • REFRACTORIES / CERAMICS TESTING: 
  • Physical Properties test – Bulk Density Compression test 
  • Cold Modulus of Rupture Permanent Dimension changes 
  • Thermal Conductivity Abradability Index 
  • Resistance to Thermal Shock 
  • Thermal expansion test
  • PROFESSIONAL SERVICES: 
  • Failure Investigations More: 
  • Metallurgical Consulting Quality management – System development, implementation and maintenance 
  • Quality management - Independent Quality System Audit Quality Assurance and Quality Control
  • Level 3 services for NDT Time Study and Productivity improvement using KAIZEN technique 
  • CALIBRATION SERVICES: 
  • Linear measuring instruments – Steel Ruler and Measuring tapes 
  • Linear measuring instruments – Vernier Callipers and Micrometers 
  • Linear measuring instruments – Microscope eyepieces 
  • Force measuring devices – Load cells 
  • Force measuring devices - Portable Masses and weights 
  • Pressure measuring devices - Gauges 
  • Temperature measuring devices - Thermometers 
  • MISCELLENEOUS SERVICES: 
  • Post weld Heat Treatment (PWHT) 
  • General Heat treatment – Annealing, Normalising, Hardening, etc see also: 
  • Failure investigations Spectrometer-Chemicalanalysis 
  • Positive Material Identification Reverce engineering